AMX NXD-CV7 - Manual (Page 88)

Upgrading Modero Firmware
80 7" Modero Widescreen Touch Panels
5. If the panel firmware version is not the latest available; locate the latest firmware file from the
www.amx.com > Tech Center > Downloadable Files > Firmware Files > Modero Panels
section of the website.
6. Download the appropriate KIT file to your computer.
7. Verify you have downloaded the latest Modero firmware (KIT) file to a known location.
8. Select Tools > Firmware Transfers > Send to NetLinx Device from the Main menu to open
the Send to NetLinx Device dialog (B in FIG. 72). Verify the panel’s System and Device
number values match those values listed within the System folder in the OnLine Tree tab of
the Workspace window (A in FIG. 72).
9. Select the panel’s KIT file from the Files section.
10. Enter the Device value associated with the panel and the System number associated with the
Master (listed in the OnLine Tree tab of the Workspace window). The Port field is greyed-out.
FIG. 71 NetLinx Workspace window (showing the panel connection via a Virtual NetLinx Master)
Showing the Virtual Master
firmware version and
device number
Showing the current Modero
panel firmware version and
device number
Shows NetLinx Studio
version number
The panel firmware is shown on the right of the listed panel.
Download the latest firmware file from www.amx.com and then save the KIT file to
your computer.
FIG. 72 Using USB for a Virtual Master transfer
A
B