AMX NXD-CV7 - Manual (Page 20)

CV7 Touch Panel Accessories
12 7" Modero Widescreen Touch Panels
Product Specifications
Wiring information for the Modero Table Top cable
If your installation requires custom cable configurations, you can purchase bulk (non-terminated)
cable from Liberty Wire and Cable under the nomenclature "AMX Table Top Cable - Modero"
(phone#: (800) 530 8998 or +1-719-388-7518).
When building a custom Table Top cable, please refer to the table below to calculate the maximum
length of the cable for your particular installation/setup.
* The total Modero cable run from the 13.5 V power source (PSN6.5).
FIG. 11 shows the top and cross-section views of the Table Top cable.
Modero Table Top Cable Specifications
Dimensions (HWD): • Length: 10 feet (3.048 m)
Connectors: • Ethernet RJ-45 connector (White) routes Ethernet signals between the touch
panel and the NXA-AVB/ETHERNET Breakout Box.
• Audio/Video RJ-45 connector (Black) routes differential audio/video signals
between the touch panel and the box.
• 2-pin 3.5 mm mini-Phoenix power connector to route power from the external
breakout box to the target panel.
Included Accessories: • Modero Table Top Cable (CA2250-50)
Maximum Table Top Cable Lengths for Modero Panels
Panel Sizes: 7" Panel 10" Panel 12" Panel 15" Panel 17" Panel
Setup I: Using a panel without a battery base*:
Maximum cable length 150’ (45.72 m) 150’ (45.72 m) 49’ (14.94 m) 39’ (11.89 m) 10’ (3.05 m)
Setup II: Using a panel with a battery base*:
Maximum cable length 56’ (17.07 m) 56’ (17.07 m) 25’ (7.62 m) 15’ (4.57 m) 10’ (3.05 m)
* The total Modero cable run from the 13.5 V power source (PSN4.4).
FIG. 11 Modero Table Top cable (top and cross-section views)
Red
Red
1
3
2
1
3
2
6 inches
3 inches
To Touch Panel To Breakout Box
Connector 3 - used for Power Connector 1 - used for Audio/Video (Black)
Connector 2 - used for Ethernet (White)