AMX NXD-CV7 - Manual (Page 114)

Firmware Pages and Descriptions
106 7" Modero Widescreen Touch Panels
The elements of the Secondary Connection page are described in the table below:
FIG. 93 Secondary Connection page (showing default values)
Secondary Connection Page Elements
Back: Saves the changes and returns you to the previously active touch panel page.
Connection Status icon: This visual display of the connection status allows the user to have a current
visual update of the panel’s connection status regardless of what page is
currently active.
• A Lock only appears on the icon if the panel has established a connection
with a currently secured target Master (requiring a username and password).
IP Settings: Sets the IP communication values for the touch panel and contains:
DHCP/STATIC Sets the panel to either DHCP or Static communication modes.
• DHCP (Dynamic Host Configuration Protocol) assigns IP Addresses to client
stations logging onto a TCP/IP network from a DHCP server.
• Static IP is a permanent IP Address that is assigned to a node in a TCP/IP
network.
Note: If DHCP is selected, the following fields become read-only: IP Address,
Subnet Mask, Gateway, Primary DNS, Secondary DNS, and Domain.
IP Address Sets the secondary IP Address assigned to the panel.
Subnet Mask Sets a subnetwork address to the panel.
• Subnetwork mask is the technique used by the IP protocol to filter messages
into a particular network segment (subnet).
Gateway Sets a gateway value to the panel.
• Gateway is a computer that either performs protocol conversion between
different types of networks/applications or acts as a go-between for two or
more networks that use the same protocols.
Host Name Sets the host name of the panel.
• PRIMARY DNS sets the address of the primary DNS server being used by the
Modero panel for host name lookups.
- DNS (Domain Name System) is software that lets users locate computers
on a local network or the Internet (TCP/IP network) by host and domain. The
DNS server maintains a database of host names for its’ domain and their
corresponding IP Addresses.
• SECONDARY DNS sets the secondary DNS value to the panel.
Primary DNS Sets the address of the primary DNS server used by the panel for host name
lookups.
Secondary DNS Sets the secondary DNS value to the Modero panel.
Domain Sets the unique name on the Internet to the panel for DNS look-up.
MAC Address This value is factory set by the manufacturer of the wireless Ethernet card.
Changes on this page
take effect after using
the BACK button to
return to the previous
page
IP Settings section
Wireless Settings section
Red fields are user-editable
Blue fields cycle through choices
Grey fields are read-only