Vestil SCALE-S - Manual (Page 15)

15
connect the battery line for rechargeable battery. Before switch on the
indicator. the
“kg” light on. It means the connection is ok. then press
after 2s. the indicator show
”000000-999999”. After the self inspection. It
go the weighing mode.
2. Switch off: Press the key, 2s latter. Auto power off,
only kg light is on. Take off the AC power supply or the battery. The kg
light off.
4.2.2 Zero operation
1. Initial zero setting
When switching on the indicator, if the weight on the scale is within
the initial zero range, indicator will put is zero automatically, and gross
weight will show zero.
2. Zero setting
It is effective in gross weight status, when the minus data or
nonzero data is within the zero setting range. Press key.
Than go to the zero.
4.2.3 10 times higher resolution and toggle operation.
1. Press UNIT key. the 10 times higher resolution weighing data
shown on the display. And after 4s back to weighing status. Press UNIT
again, the indicator proceed the toggle operation. And after 4s return.
2. Weight unit---kg/lb toggle operation. If the unit is kg, the kg light
PDF 文件使用 "pdfFactory" 试用版本创建 www.fineprint.cn