Vanguard ATO-600P - Manual (Page 32)

ATO-400P / ATO-600P Operating Procedures
32
7.7 Restore Record Procedure
This procedure describes the steps to recall a test record stored in the ATO’s Flash memory to
working memory.
Table 9.0 Restore Record Procedure
STEP ACTION ATO DISPLAY
9-1 On the START MENU, press key #2
(SETUP) to display the SETUP MENU.
9-2 On the SETUP MENU, press key #3
(RESTORE RECORD) to display a menu of
options (Restore Record, Directory, Erase
Record).
9-3 Press key #1 (RESTORE RECORD) to
display a menu of restore records options.
Option 1 allows users to restore a record
when the record’s number is known, Option
2 allows the user to scroll through the stored
records to select the correct one.
9-4 OPTION 1:
Press key #1 (ENTER RECORD
NUMBER) to display a prompt to enter the
record number to restore.
9-5 When the record’s number has been entered,
press the “ENTER” key to restore the
selected record. “RECORD
RESTRORED!” message is then displayed.
Press “ENTER” key again to return to the
REVIEW RECORD options menu (resume
the procedure at step 8-2 in Table 8.0).
9-6 OPTION 2:
Press key #2 (SCROLL TO SELECT) in the
RESTORE RECORD menu to display the
Records Directory.
9-7 In the Records Directory, use the
? and the
? keys to scroll through the directory
listings of test records. When the test record
of interest displays, press the “ENTER” key
to restore the test record.
1. ENTER ID
2. REVIEW RECORD
3. RESTORE RECORD
4. NEXT PAGE
1. RESTORE RECORD
2. DIRECTORY
3. ERASE RECORDS
RESTORE RECORD
1. ENTER RECORD NUMBER
2. SCROLL TO SELECT
RESTORE RECORD
NUMBER: 12
RECORD RESTORED!
RECORDS DIRECTORY
“UP” TO SCROLL FWD
“DWN” TO SCROLL RVS
#1 04/11/05 17:27:00
1710
VIC