Vanguard ATO-600P - Manual (Page 29)

ATO-400P / ATO-600P Operating Procedures
29
Table 7.0 Enter Record ID Procedure (continued)
STEP ACTION ATO DISPLAY
7-7 Enter the test item’s MODEL using the
alpha/numeric keypad. Press “ENTER” to
load the entered characters and advance to the
“SERIAL NUMBER” input screen.
7-8 Enter the test item’s SERIAL NUMBER
using the alpha/numeric keypad. Press
“ENTER” to load the entered characters and
advance to the “KVA RATING” input screen.
7-9 Enter the test item’s KVA RATING using the
alpha/numeric keypad. Press “ENTER” to
load the entered characters and advance to the
“OPERATOR” input screen.
7-10 Enter the test OPERATOR name, using the
alpha/ numeric keypad. Press “ENTER” to
load the entered characters and return to the
START MENU display.
This completes the ENTER ID procedure.
SERIAL NUMBER:
UP/DOWN TO POSITION
“ENTER” TO ACCEPT
KVA RATING:
UP/DOWN TO POSITION
“ENTER” TO ACCEPT
OPERATOR:
UP/DOWN TO POSITION
“ENTER” TO ACCEPT
1. RUN TEST 04/11/05
2. SETUP 12:26:01
3. DIAGNOSTIC