beautypg.com

Probe calibration menu, Figure 16. accessing the probe calibration menu – Teledyne LeCroy QPHY-DDR2 User Manual

Page 22

background image

22

QPHY-DDR2-OM-E Rev

A

Probes are connected electrically in a single-ended arrangement: the positive (+) side of the probe must be
connected to the signal trace, while the negative (-) side is connected to the ground plane.

Figure 15. Differential probe properly connected to the fixture (Solder-In configuration)

Probe Calibration Menu

The probe calibration menu can be accessed from the Vertical drop-down menu or from the channel dialog:

Figure 16. Accessing the probe calibration menu

See also other documents in the category Teledyne LeCroy Software: