Teledyne LeCroy AP034 - Manual (Page 26)

AP034 Active Differential Probe
20 922261-00 Rev A
8. If returning a probe to a different country, also:

Mark shipments returned for service as a “Return of US manufactured goods for
warranty repair/recalibration.”

If there is a cost involved in the service, put the service cost in the value column and
the replacement value of the probe in the body of the invoice marked “For insurance
purposes only.”

Be very specific as to the reason for shipment. Duties may have to be paid on the value
of the service.
Replacement Parts
The probe connection accessories, and other common parts can be ordered through the regional
customer care centers. Refer to Table 3 for Teledyne LeCroy part numbers. Defective probes can be
replaced on an exchange basis. The replacement exchange probe will have been factory repaired,
inspected and calibrated to the same standards as a new product. In order to obtain an exchange
probe, you must return the defective probe. The returned probe should be sent back to the
regional customer care center without any accessories, manual, or case.
Figure 6, Replaceable Parts