Teledyne LeCroy HDO 4000 Operators Manual - Manual (Page 51)

HDO4000 High Definition Oscilloscope
Edge trigger with holdoff by events.
Holdoff Settings
To access the Trigger Holdoff dialog, choose Triggers > Trigger Setup from the menu bar or press the
Front Panel Trigger Setup button, then touch the Holdoff tab.
Holdoff by - type of holdoff to use with trigger: None, Time (clock), or Event.
Time - if using Holdoff by Time, the time in S to wait before triggering.
Events - if using Holdoff by Events, the number of events to count before triggering.
Starts Holdoff Counter On - whether to count holdoff time/events from Acquisition Start or Last Trigger
Time before triggering again.
922498 Rev B 43