Teledyne LeCroy HDO 4000 Operators Manual - Manual (Page 115)

HDO4000 High Definition Oscilloscope
3. On the Tools & Utilities page, beneath Protection Tools, click Acronis Startup Recovery Manager.
4. On the Acronis Startup Recovery Manager window, click Activate. F11 boot time recovery is now ena-
bled.
NOTE: The process "Searching for Acronis Secure Zone…" may take several minutes.
Restore Software to Current Revision Levels
The recovery process produces a replica of the operating system and oscilloscope application software
at the revision levels that were current when the oscilloscope was manufactured. It does not
automatically upgrade the:
l
Oscilloscope application software (X-Stream)
l
Windows operating system
l
Virus scan definition files
l
Drivers for some hardware options and accessories
Therefore, after completing the disk image recovery, it is highly recommended to search vendor websites
and upgrade the individual components to current revision levels.
The latest oscilloscope application software can be downloaded directly from the Teledyne LeCroy
website at teledynelecroy.com. Most required hardware drivers can be installed during the firmware
upgrade.
Since the calibration data for the oscilloscope is stored in the D: drive, current calibration constants are
not overwritten during recovery of the C: drive. You do not need to restore these.
Technical Support
Phone
Registered users can contact their local Teledyne LeCroy service center at the number listed in this
manual to make Technical Support requests by phone or email.
Web
You can also submit Technical Support requests via the website at:
teledynelecroy.com/support/techhelp.
Teledyne LeCroy publishes a free Technical Library on its website. Manuals, tutorials, application notes,
white papers, and videos are available to help you get the most out of your Teledyne LeCroy products.
The Datasheet published on the product page contains the detailed product specifications.
You can also download Oscilloscope System Recovery Tools and Procedures, which contains instructions
for using Acronis® True Image® Home included with the oscilloscope.
922498 Rev B 107