Teledyne LeCroy LSIB-1 Host Interfaces - Manual (Page 22)

LSIB-1 Host Interfaces
16 LSIB-OM-E Rev C
Control Sample
The Control sample automatically runs after installing
LSIB on the host Laptop/PC. Alternatively, launch the
sample from the following locations:

Windows - Start
→ All Programs → Teledyne
LeCroy → XStream → LSIB folder.

Linux - directory_path/LSIB_xxxxxx/LSIB.
NOTE: directory_path refers to the location where
you unzipped the tar archive.
Use the Control Sample by completing the following
steps:
On Your Laptop/PC
1. Confirm that the remote control interface indicates
that it's Waiting for Connection as follows.
W INDOWS