Teledyne LeCroy LSIB-1 Host Interfaces - Manual (Page 21)

Operator's Manual
LSIB-OM-E Rev C 15
Samples and Demo Applications
Overview
Samples of LSIB setups and configurations are provided
with your software installation. Examples demonstrate
control and export functions and are located in the
following locations:

Windows - Start
→ All Programs → Teledyne
LeCroy → XStream → LSIB folder.

Linux - directory_path/LSIB_xxxxxx/LSIB .
NOTE: directory_path refers to the location where
you unzipped the tar archive.
The samples provide the following functionality:

Control – Creates a connection allowing you to
control the oscilloscope using remote commands.
(Currently, Scope Explorer is not supported).

Export – demonstrates the transfer of data from
the oscilloscope to the host PC, and converting the
data to the TRC format on the host Laptop or PC.
The Performance demo application demonstrates the
transfer rate by transferring waveforms using the LSIB
Export functionality.
When the Application and Driver installation is complete,
the Control Sample is automatically executed (unless
specifically un-checked and configured not to during the
installation).
NOTE: Running and reviewing the samples are a great
way to verify the setup is configured correctly and the
connection is working properly.