Teledyne LeCroy LSIB-1 Host Interfaces - Manual (Page 12)

LSIB-1 Host Interfaces
6 LSIB-OM-E Rev C
2. After unpacking, verify all items listed in the
packing list are present.
3. Inspect the equipment for shipping damage.
4. Save all packing material for storage or return
shipment of the equipment.
5. Remove LSIB-HOSTCARD from the anti-static bag.
Installation
1. Shut down the host laptop into which you are
installing the card.
2. Remove the plastic filler plate (if necessary) from
the ExpressCard slot and guide the card in place
following the manufacturer's instructions.
NOTE: The card may be installed in any
ExpressCard/34 (single wide) or ExpressCard/54
(double wide) slot.