KB Electronics KBMM-225D - Manual (Page 6)

6
This product should be installed and serviced by a qualified technician, electrician, or electrical main-
tenance person familiar with its operation and the hazards involved. Proper installation, which includes
wiring, mounting in proper enclosure, fusing or other over current protection, and grounding can reduce the
chance of electrical shocks, fires, or explosion in this product or products used with this product, such as elec-
tric motors, switches, coils, solenoids, and/or relays. Eye protection must be worn and insulated adjustment tools
must be used when working with control under power. This product is constructed of materials (plastics, metals,
carbon, silicon, etc.) which may be a potential hazard. Proper shielding, grounding, and filtering of this product
can reduce the emission of radio frequency interference (RFI) which may adversely affect sensitive electronic
equipment. It is the responsibility of the equipment manufacturer and individual installer to supply this Safety
Warning to the ultimate end user of this product. (SW effective 11/1992). Be sure to follow all instructions care-
fully. Fire and/or electrocution can result due to improper use of this product.
!
Definition of Safety Warning Symbols:
Electrical Hazard Warning Symbol – Failure to observe this warning could result in electrical shock
or electrocution.
Operational Hazard Warning Symbol – Failure to observe this warning could result in serious injury
or death.
2 SAFETY WARNING – Please read carefully.
!
This product complies with all CE directives pertinent at the time of manufacture. Contact the Sales
Department for Declaration of Conformity. Installation of a CE approved RFI filter is required (see
Section 14.12, on page 30). Additional shielded cable and/or AC line cables may be required along with a sig-
nal isolator (SI-6 (Part No. 9444)).