Janam XT85 - Manual (Page 8)

Getting Started XT85 User Manual
Janam Technologies LLC 2 ―2
Install the Battery
1. Slide the battery lock switch to the unlocked
position (fully to the right).
2. Tilt the bottom of the battery inward (into the
battery chamber of the XT Series device body),
positioning the tabs at the bottom of the battery
into the mating notches at the bottom of the
battery chamber.
3. Tilt the top of battery toward the XT Series device
body until it snaps securely into place.
4. Slide the battery lock switch to the locked
position (fully to the left)Charging the Battery
 IMPORTANT BATTERY INFORMATION!
**CAUTION**
Use only Janam-approved batteries.
There is the risk of explosion if battery is replaced by an incorrect type.
Always dispose of used batteries according to the instructions.
**WARNING**
The main (removable) battery charges the XT Series internal backup battery with or
without an external power source. A fully charged main battery must remain
installed for at least 1.5 hours to charge the internal backup battery. All user data
can be lost if the main battery is removed before the internal battery is properly
charged, so it is recommended that the internal backup battery capacity be 100%
before removing the main battery. To check the condition of the backup battery, tap
Settings from the Windows Mobile desktop screen > Power (icon).
Suspend device operation with the Red power key before removing the main battery.
Top
Battery
Tabs