Janam XT85 User Manual
Page 36

Setting Up the XT Series Device
XT85
User Manual
Janam Technologies LLC
3
―19
Communication Ports
The table below identifies the XT85 Comm Ports that are currently allocated. When
selecting a Virtual Comm Port the Comm Ports below will not be available for use if the
XT85 is configured with that function.
COM2
Physical COM for Bluetooth
Will be occupied when the Bluetooth
function is turned on
COM4
Physical COM for IrDA
Will be occupied when the IrDA function is
turned on
COM5
Physical COM for bottom connector
Fully accessible by user application (Non
multiplex)
COM6
Physical COM for SE965 laser scan engine Will be occupied when the Laser Scan
Engine is in use
COM7
Physical COM for u-blox GPS module
By default, COM9 will occupy and control
COM7. If an application uses COM7
directly, then other applications will not
be able to access the GPS data
COM9
Virtual COM for GPS applications
In order for multiple applications to
simultaneously acquire GPS data, the
applications need to configure GPS
communication with COM9