IDEC High Performance Series - Manual (Page 927)

WindO/I-NV2 User’s Manual 18-1
18
R
ec
ipe
Func
tion
yw
This chapter describes how to configure the Recipe function and its operation on the MICRO/I.
1.1 How the Recipe Function is Used
The Recipe function batch writes values prepared in advanced to specified devices and batch reads the values for
specified devices according to the state of a device. Use this function for situations such as configuring the initial
values of a host when the MICRO/I starts running. The data used by the Recipe function is called recipe data for the
data saved in internal memory, a recipe file for data saved to the memory card, and recipe values for the values
written to devices that were saved in recipe data and recipe files.
The Recipe function can perform the following functions.
• Batch write the recipe values saved in internal memory to devices when a device value changes from 0 to 1
• Batch write the recipe values saved on the memory card to devices when a device value changes from 0 to 1
• Batch read device values and save them to the memory card as a recipe file when a device value changes from 0 to 1
Chapter 18
Recipe Function
1 Overview
HG3G HG2G-5F HG2G-5S HG2G-S HG4G HG1F HG2F HG2S HG3F HG4F
Host
MICRO/I
0
1
Internal Memory
D100= 0
D101= 0
D102= 0
100
150
200
Write
100
150
200
Recipe Data
HG3G HG2G-5F HG4G
HG2F HG3F HG4F
Host
MICRO/I
0 1
Memory Card
D100= 0
D101= 0
D102= 0
100
150
200
100,
150,
200,
Recipe File
Write
HG3G HG2G-5F HG4G
HG2F HG3F HG4F
Host
MICRO/I
0
1
Memory Card
D100= 100
D101= 150
D102= 200
100,
150,
200,
Recipe File
Output to memory card
Device values can be retained when the power is turned off by reading device values to the memory card
and saving them as a recipe file and then writing those values the next time the power is turned on.