IDEC High Performance Series - Manual (Page 1420)

6 USB Driver
A-8 WindO/I-NV2 User’s Manual
6.1 Installing the USB driver
●
HG2G-5F, HG3G/4G
Windows 7/8, Windows Vista
Follow these steps to install the HG2G-5F, HG3G/4G USB driver.
1 Connect the USB cable to the USB interface on the MICRO/I (with power supplied) and the USB port on the computer
(computer should be on).
6 USB Driver
HG3G HG2G-5F HG2G-5S HG2G-S HG4G HG1F HG2F HG2S HG3F HG4F
HG3G HG2G-5F HG2G-5S HG2G-S HG4G HG1F HG2F HG2S HG3F HG4F
Before the MICRO/I can be connected to a computer, it is necessary to install either WindO/I-NV2 or the
Downloader. If you connect MICRO/I to the computer before installing either driver, an error message will
appear prompting you to install the driver software. In this case, clear the error and install either driver.
The USB interface on the HG2G-5F, HG3G/4G supports both the 64-bit and 32-bit editions of
Windows 7/8, and the 32-bit edition of Windows Vista. It does not support the 64-bit edition of Windows
Vista.
HG3G HG2G-5F HG4G
MICRO/I
Computer
USB cable
A plug Mini-B plug
To USB port To USB interface
If running Windows Vista, the following dialog box appears.
Click Ask me again later.