Sonnet Technologies Fusion RAID Configuration Tool and Utilities Operation Manual - Manual (Page 7)

1
About the Configuration Tool
The ATTO Configuration Tool is the utility program that displays
information about installed controllers, drivers and drives in your
Fusion storage system, and provides the means to configure and
manage them.
This program executes under:
• Mac OS ® X 10.4 or later
• Windows ® 7/Server 2008/Vista ® /Server 2003/XP
• Linux ® 2.4 and 2.6 kernels, x86 and x64
Note: Java version 1.5 or later must be installed.
The ATTO Configuration Tool displays:
• The name of the Sonnet RAID controller (listed as an ExpressSAS
Rxxx adapter)
• Information about the drivers controlling the Sonnet RAID
controller, including version information for both the currently
executing driver and the flash image
• Information about Fusion drive enclosures attached to the
Sonnet RAID controller (except D400RAID, D800RAID, and
R800RAID) such as fan and power supply status
• Information about drives within attached Fusion drive enclosures
You may use the Configuration Tool to:
• Manage RAID groups
• Configure RAID Event notifications
• Modify the RAID controller’s NVRAM settings
• Revert to default factory settings
• Update the RAID controller’s flash image
• Obtain drive health information
• Obtain drive enclosure health information
The factory settings on your Sonnet RAID controller provide
excellent performance for a wide range of applications. However,
some applications may benefit from modification of the
controller’s NVRAM settings that tune the controller for a specific
performance range.
Configuration Tool Launch
1. Locate the application icon in the folder created during
installation.
2. Double-click the ATTO Configuration icon to start the
application.
Note: The Sonnet RAID controller is designed to operate properly using
factory settings. Entering invalid or incorrect NVRAM settings
may cause your Sonnet RAID controller to function incorrectly.
The main screen has three panes: Device Listing, Configuration
Options and Status.
Configuration Tool Navigation
The Device Listing pane at the left of the window lists all
compatible devices (controllers and enclosures) currently
connected to the system.
Expand the device tree to reveal additional details on connected
devices.
The Configuration Options pane provides information and
options for a device highlighted in the device listing.
If you highlight a device in the Device Listing pane, tabs and
panes are displayed for that device.
The following chart specifies the tabs that are displayed for the
indicated device type:
Tree Node Tab(s) Displayed
Local Host Basic Info, Notifications, SNMP
Controller Basic Info, Flash, RAID, RAID CLI, Tasks,
Advanced
Channel NVRAM, Basic Info
Device Basic Info, Flash, SES
1.0 ATTO Configuration Tool Overview
Support Note: In the ATTO Configuration Tool’s Device
Listing pane, the Sonnet RAID controller is identified as an
ExpressSAS Rxxx.
WARNING: Back up system data when installing or
changing hardware configurations.