Sonnet Technologies Fusion RAID Configuration Tool and Utilities Operation Manual - Manual (Page 5)

Contents
1.9 SNMP Configuration................................................................................................................ 45
Definitions
Details
Enabled Mode
SubAgent Mode
Disabled Mode
Basic Setup
Configuration Options
Agent Port
Communities
Send Authentication Trap
Enable Traps
Trap Destination Table
Control Buttons
Commit
Restore
Default
Test
Save MIBs
Troubleshooting
Requests from an MIB browser time out:
Traps are not received when testing
RAID OIDs are skipped when walking or the tables are empty
1.10 Configuration Tool Troubleshooting........................................................................................ 51
Messages from NVRAM Tab Actions
An error occurred loading NVRAM data.
Warning: NVRAM could not be read, defaults returned.
An error occurred updating the NVRAM.
Feature bounds checking.
Execution Throttle is greater than the maximum allowable value of 255.
Messages from Flash Tab Actions
This is not a flash file, or it is corrupt.
This HBA is not compatible with the selected flash file.
A valid file was not selected.
An error occurred reading from the flash file, the file may be corrupt.
An error occurred updating the flash.
The card has been prepared for firmware updating…
2.0 Drive Performance Testing...................................................................................................... 53
2.1 Windows Only - ATTO Disk Benchmark..................................................................................... 55
Benchmark Fields
Radio Button Group
Multiple Benchmark Testing
2.2 ATTO Disk Benchmark Troubleshooting..................................................................................... 57