SKC DataTrac for the Leland Legacy User Manual

Page 39

Reports

Figure 40. Close-up of the Sample Sheet

Setup Window Showing Active Check Boxes

Load Template .....loads a template fi le
Save Template ......saves a template fi le
Print .......................prints the current sample sheet data displayed on screen
Exit .........................exits the Sample Sheet Setup window and returns to the

previous window

Option Menu

Merge Pump ........writes the pump history from the connected pump

memory to the displayed sample sheet setup and creates
a worker exposure profi le

Merge File .............writes the pump history from a previously stored

history fi le to the displayed sample sheet setup, and
creates a worker exposure profi le

Clear Sample
Sheet ...................clears all entered data from cells

Setup Files

The Sample Sheet Setup window (Figure 39) contains a list of information (in data
cells) that will be printed in a report. The displayed sample sheet setup can be saved
to a PC as a setup fi le (.stp). A setup fi le consists of all the information contained
in all data cells.

Enter Data into Sample Sheet

To enter the information into the data cells, click on the cell then type the data
using a keyboard. The Tab key can be used to move from one cell to the next.

Save Setup

To save all entered data, select the Save Setup command from the File menu.
The Save Setup command saves all data as a setup fi le (.stp).

Template Files

The displayed sample sheet setup can also be saved to a PC as a template fi le (.tpl).
A template fi le reduces the need to repeatedly type data that rarely changes. A
template fi le contains only the information included in the data cells that have an
active check box (the small square butt on before the data cell as shown in Figure
40). To activate a check box, click on it until a check mark appears.