SKC DataTrac for the Leland Legacy - Manual (Page 36)

33
SKC Pump History
User Setup ............pump user interface accessed and user adjusting
pump
Pre-Cal Flow ........single-point calibration mode; fi rst calibration
average, date, and time
Post-Cal Flow .......single-point calibration mode; fi nal calibration
average, date, and time
Timed Run ............pump running a preset sampling time (ST)
Low Bat .................batt ery depleted
FullCal ...................full (multiple-point) calibration mode
Flow Adjust ..........pump fl ow rate or fl ow correction being adjusted by
user
Flow .......................fl ow rate in L/min
Start Date ..............start date of the program
Start Time .............start time of the program
Volume (Liters) ....fl ow rate multiplied by the duration
Accum. Volume ...sum of all previous volumes (Liters) on the history
page
Duration ...............total running time of the program