Asante Technologies 40240/40480-10G - Manual (Page 551)

* Vendor-specific options may or may not be advertised by neighboring devices.
lldp
This command enables LLDP globally on the switch. Use the no form to disable
LLDP.
Syntax
[no] lldp
Default Setting
Enabled
Command Mode
Global Configuration
Example
Console(config)#lldp
Console(config)#
32-2
Table 32-1 LLDP Commands (Continued)
Function
Configures an LLDP-enabled port to advertise its VLAN
name
Configures an LLDP-enabled port to advertise its link
aggregation capabilities
Configures an LLDP-enabled port to advertise its MAC and
physical layer specifications
Configures an LLDP-enabled port to advertise its maximum
frame size
Configures an LLDP-enabled port to advertise its
Power-over-Ethernet capabilities
Shows LLDP configuration settings for all ports
Shows LLDP global and interface-specific configuration
settings for this device
Shows LLDP global and interface-specific configuration
settings for remote devices
Shows statistical counters for all LLDP-enabled interfaces
Command
lldp dot1-tlv
vlan-name*
lldp dot3-tlv
link-agg
lldp dot3-tlv
mac-phy
lldp dot3-tlv
max-frame
lldp dot3-tlv
poe
show lldp config
show lldp info
local-device
show lldp info
remote-device
show lldp info
statistics
Mode Page
IC 32-11
IC 32-12
IC 32-12
IC 32-13
IC 32-13
PE 32-14
PE 32-15
PE 32-16
PE 32-18
LLDP Commands
32