Asante Technologies 40240/40480-10G - Manual (Page 528)

show interfaces status
This command displays the status for an interface.
Syntax
show interfaces status [interface]
interface
• ethernet unit/port
- unit - Stack unit. (Range: 1-8)
- port - Port number. (Range: 1-26/50)
• port-channel channel-id (Range: 1-32)
• vlan vlan-id (Range: 1-4093)
Default Setting
Shows the status for all interfaces.
Command Mode
Normal Exec, Privileged Exec
Command Usage
If no interface is specified, information on all interfaces is displayed. For a
description of the items displayed by this command, see “Displaying
Connection Status” on page 8-1.
Example
Console#show interfaces status ethernet 1/5
Information of Eth 1/5
Basic Information:
Port Type
Mac Address
Configuration:
Name
Port Admin
Speed-duplex
Capabilities
Broadcast Storm
Broadcast Storm Limit
Flow Control
LACP
Port Security
Max MAC Count
Port Security Action
Media Type
Current status:
: 1000T
: 12-34-12-34-12-49
:
: Up
: Auto
: 10half, 10full, 100half, 100full, 1000full
: Enabled
: 500 packets/second
: Disabled
: Disabled
: Disabled
: 0
: None
: Copper forced
Link Status : Up
Port Operation Status : Up
Operation Speed-duplex : 100full
Flow Control Type : None
Console#show interfaces status vlan 1
Information of VLAN 1
MAC Address: 00-00-AB-CD-00-00
Console#
27-9
show interfaces status
27