Figure 10-1, Sta information, Displaying global settings – Asante Technologies 40240/40480-10G User Manual
Page 210
Console#show spanning-tree
Spanning-tree information
---------------------------------------------------------------
Spanning Tree Mode:
MSTP
Spanning Tree Enabled/Disabled:
Enabled
Instance: 0
VLANs Configuration:
1-4093
Priority: 32768
Bridge Hello Time (sec.):
2
Bridge Max Age (sec.):
20
Bridge Forward Delay (sec.):
15
Root Hello Time (sec.):
2
Root Max Age (sec.):
20
Root Forward Delay (sec.):
15
Max Hops:
20
Remaining Hops:
20
Designated Root:
32768.0.0001ECF8D8C6
Current Root Port:
1
Current Root Cost:
100000
Number of Topology Changes:
1
Last Topology Change Time (sec.): 1521
Transmission Limit:
3
Path Cost Method:
Long
---------------------------------------------------------------
Eth 1/
1
information
---------------------------------------------------------------
Admin Status:
Enabled
Role: root
State: forwarding
External Admin Path Cost: 0
Internal Admin Path Cost: 0
External Oper Path Cost: 100000
Internal Oper Path Cost: 100000
Priority: 128
Designated Cost:
0
Designated Port:
128.15
Designated Root:
32768.0.0001ECF8D8C6
Designated Bridge:
32768.0.0001ECF8D8C6
Fast Forwarding:
Disabled
Forward Transitions:
1
Admin Edge Port:
Disabled
Oper Edge Port:
Disabled
Admin Link Type:
auto
Oper Link Type:
Point-to-point
.
Spanning Tree Status:
Enabled
CLI – This command displays global STA settings, followed by settings for each port.
33-18
Displaying Global Settings
10
.
.
Note:
The current root port and current root cost display as zero when this device is not
connected to the network.
10-5