Asante Technologies 40240/40480-10G - Manual (Page 474)

Example
Console#show radius-server
Remote RADIUS server configuration:
Global settings:
Communication key with RADIUS server: *****
Server port number: 1812
Retransmit times: 2
Request timeout: 5
Server 1:
Server IP address: 192.168.1.1
Communication key with RADIUS server: *****
Server port number: 1812
Retransmit times: 2
Request timeout: 5
Console#
TACACS+ Client
Terminal Access Controller Access Control System (TACACS+) is a logon
authentication protocol that uses software running on a central server to control
access to TACACS-aware devices on the network. An authentication server
contains a database of multiple user name/password pairs with associated privilege
levels for each user or group that require management access to a switch.
Table 25-6 TACACS+ Client Commands
Command Function Mode
tacacs-server host Specifies the TACACS+ server GC
tacacs-server port Specifies the TACACS+ server network port GC
tacacs-server key Sets the TACACS+ encryption key GC
show tacacs-server Shows the current TACACS+ settings GC
Page
25-9
25-10
25-10
25-11
25-9
tacacs-server host
This command specifies the TACACS+ server. Use the no form to restore the
default.
Syntax
tacacs-server host host_ip_address
no tacacs-server host
host_ip_address - IP address of a TACACS+ server.
Default Setting
10.11.12.13
TACACS+ Client
25