Asante Technologies 40240/40480-10G - Manual (Page 162)

Web – Click Security, IP Filter. Enter the IP addresses or range of addresses that
are allowed management access to an interface, and click Add IP Filtering Entry.
Figure 6-13 IP Filter
CLI – This example restricts management access for Telnet clients.
Console(config)#management telnet-client 192.168.1.19 25-35
Console(config)#management telnet-client 192.168.1.25 192.168.1.30
Console(config)#exit
Console#show management all-client 25-36
Management IP Filter
HTTP-Client:
Start IP address End IP address
-----------------------------------------------
SNMP-Client:
Start IP address End IP address
-----------------------------------------------
6
Filtering IP Addresses for Management Access
TELNET-Client:
Start IP address End IP address
-----------------------------------------------
1. 192.168.1.19
2. 192.168.1.25
Console#
192.168.1.19
192.168.1.30
6-27