Show logging – Asante Technologies 40240/40480-10G User Manual

Page 436

Related Commands

show logging sendmail (23-35)

show log

This command displays the log messages stored in local memory.

Syntax

show log {flash | ram}

•

flash - Event history stored in flash memory (i.e., permanent memory).

•

ram - Event history stored in temporary RAM (i.e., memory flushed on

power reset).

Default Setting

None

Command Mode

Privileged Exec

23-31

Field

Syslog logging

REMOTELOG status

REMOTELOG

facility type

REMOTELOG level type

REMOTELOG

server IP address

Description

Shows if system logging has been enabled via the logging on command.

Shows if remote logging has been enabled via the logging trap command.

The facility type for remote logging of syslog messages as specified in the

logging facility command.

The severity threshold for syslog messages sent to a remote server as specified

in the logging trap command.

The address of syslog servers as specified in the logging host command.

Event Logging Commands

The following example displays settings for the trap function.

Syslog logging: Enable

REMOTELOG status: disable

REMOTELOG facility type: local use 7

REMOTELOG level type:

Debugging messages

REMOTELOG server IP address: 1.2.3.4

REMOTELOG server IP address: 0.0.0.0

Console#

Table 23-11 show logging trap - display description