Allied Telesis AT-WA1104G-10 - Manual (Page 76)

Features in 291-04 76
Version 291-10
C613-10488-00 REV G
Level 4
CR Module Level Description AR4
00
AR7
x5
AR7
x0S
Rap
ier i
AT
-8800
A
T-8
600
A
T-8
700
XL
x900
-48
A
T-
99
00
A
T-9
800
CR00004677 Core 4 When the router or switch rebooted, its internal clock lost approximately
1 second.
This issue has been resolved. The time loss on reboot has been reduced.
Y Y Y Y Y – Y Y Y Y
CR00009087 Core, Utility 4 The following issues occurred with the commands show debug active and
disable debug active:
■ The command did not adequately warn users if an invalid module number had
been entered into the active parameter.
This issue has been resolved. The router or switch now displays an error unless
the value is between 1 and 142.
■ The CLI “?” help description for the active parameter listed an incorrect
number range and also listed modules that cannot be manipulated through
this command.
This issue has been resolved. The “?” help description is now correct.
Y Y Y Y Y Y Y Y Y Y
CR00011695 QoS 4 The “?” help description for switch commands that accept a value in bytes (or
similar units such as kbytes or bytes/s) incorrectly indicated that the units were
bps. The commands this issue applied to depend on the switch model, but
include commands such as:
create qos trafficclass=value maxburst=?
create qos policy=value dtcmaxburst=?
set qos red=value start1=?
set swi port=value bcl=?
set swi dlfl=?
This issue has been resolved. The “?” help description now displays the correct
units.
– – – Y Y Y Y Y Y Y