Allied Telesis AT-WA1104G-10 - Manual (Page 20)

Features in 291-08 20
Version 291-10
C613-10488-00 REV G
CR00017731 IP Gateway,
DHCP
2 When the DHCP server was enabled on a router or switch that also had a
local IP interface defined by using the set ip local command, outgoing
DHCP server packets would use the set ip local command's IP address as
their source address. Furthermore, if the broadcast flag was set to TRUE in
the DHCP Discover message that the server was replying to, then the server
would send the DHCP Offer packet out the wrong IP interface with the
wrong source IP address. Microsoft Windows Vista has the broadcast flag
set to TRUE.
These issues have been resolved. The DHCP server configuration now
ignores any local IP interfaces set by using the set ip local command, and
the server now sends the Offer message out the interface that it received
the Discover on.
Y Y Y Y Y Y Y Y Y Y Y
CR00017749 Switching 2 If a multicast route had an odd number of downstream interfaces attached
to it, and the last downstream interface was deleted, the second to last
downstream interface could experience a loss of packets.
This issue has been resolved.
- - - - - - - - Y Y -
CR00017816 PIM 2 PIM would sometimes start forwarding duplicate packets from the RP to
downstream interfaces if the SPT Bit had been set and had become unset.
This issue has been resolved.
Y Y Y Y Y Y Y - Y Y Y
CR00017906 VLAN, MSTP 2 If ports were removed from a VLAN and MSTP was enabled, then the port
removal was not included in the configuration displayed by the command
show config dynam or saved by the command create config.
This issue has been resolved.
- - - Y Y Y Y Y Y Y -
CR Module Level Description AR4
00
AR7
x5
AR7
x0S
Rap
ier i
Rap
ier w
AT
-8800
A
T-8
600
A
T-8
700
XL
x900
-48
A
T-
99
00
A
T-9
800