Allied Telesis AT-WA1104G-10 - Manual (Page 71)

Features in 291-04 71
Version 291-10
C613-10488-00 REV G
CR00014163 Firewall 3 When the firewall was performing NAT on UDP video streams and two streams
started up at the same time, sometimes one or both streams displayed excessive
jitter.
This issue has been resolved.
Y Y Y Y Y – – – – –
CR00014178 Core 3 The following issues occurred with environmental monitoring:
■ on AR750S and AR770S routers, the values reported by the show system
command were incorrect for the first few seconds after a cold restart
■ on AR770S routers, the router did not indicate power supply problems
through log messages or the system LED
These issues have been resolved.
– – Y – – – – – – –
CR00014285 BGP 3 The default setting for BGP capability matching is now loose instead of strict.
This matches the requirements of RFC 4271. Y Y Y Y Y Y Y Y
CR00014305 Switch 3 On AT-8748XL and Rapier 48i switches, mirroring did not work when:
■ only one (not both) of the uplinks had an expansion module installed and
■ that uplink (port 49 or 50) was the mirror port
This issue has been resolved.
– – – Y – – Y – – –
CR00014313 GUI, Log 3 If the user cleared the Queue Output checkbox on the Modify Log Output
Definition page of the GUI, it displayed an error instead of making the change.
This issue has been resolved. The GUI can now be used to turn off queuing of
logging output.
Y Y Y Y Y Y Y – Y Y
CR00014327 MSTP, GUI 3 When using the GUI to configure the MSTP CIST, users had to specify the external
and internal port path costs. If these were not specified, the GUI gave an error
instead of configuring the CIST.
This issue has been resolved. By default, the GUI now specifies “default” for the
path costs. This value of “default” leaves the current setting unchanged.
– – – Y Y Y Y Y Y –
CR Module Level Description AR4
00
AR7
x5
AR7
x0S
Rap
ier i
AT
-8800
A
T-8
600
A
T-8
700
XL
x900
-48
A
T-
99
00
A
T-9
800