Fairbanks 1129 SERIES Dual Platform Counting Scale - Manual (Page 39)

Section 4: User Operations
08/12 39 51300 Rev. 1
4.7.3. Alarm Function, Continued
EXAMPLE, Continued
6. Put one pound (1 lb.) on scale weighing pan.
– The Lower Alarm is indicated and flashing
– An audible alarm will start if the Low Beep Sound is enabled.
7. Put eleven pounds (11) on scale weighing pan.
– The Upper Limit Alarm displays and will be flashing.
– An audible alarm will start if the High Beep Sound is enabled.
IMPORTANT NOTES:
1. If the Piece Count exceeds the PCS Upper Limit or the PCS Lower Limit,
and it is not zero, the scale will continue to beep as a warning.
2. If the Weight Count exceeds the Weight Upper Limit or Weight Lower Limit,
and is not zero, the scale will continue to beep for a warning.
3. The beep settings are configured in the SEtUP Menu .
4.8. “B SCALE” SELECTION
1. Press to switch between the Main Scale and the External Scale.
– The initial zero is configured in the Calibration Procedure.
– Any loads on the weighing pan will display their exact weight after the scale
starts.