Fairbanks 1129 SERIES Dual Platform Counting Scale - Manual (Page 38)

Section 4: User Operations
08/12 38 51300 Rev. 1
1.7.3 Alarm Function, Continued
EXAMPLE, Continued
8. Place eleven pounds (11 lbs.) on scale weighing pan.
– The Piece Weight shows twenty-two pounds (22 lbs.)
– The Upper Limit Alarm displays and will be flashing.
– An audible alarm will start if the High Beep Sound is enabled.
WEIGHT ALARM
After configuring the Piece alarm, the scale enters the Weight Alarm setting.
– The PCS column displays .
1. Set up the Weight Lower Limit with the numeric keys. (If the unit is kg, this unit
is in grams. If the unit is lb, this unit is in lb)
2. Press again.
– The PCS column displays .
3. Set up the Weight Lower Limit with the numeric keys.
– If the Unit Setting is Kilograms , this unit is in Grams.
– If the Unit Setting is Pounds , this unit is in Lb.
4. Press key to save your settings and return to Weight Mode.
EXAMPLE
1. Press three (3) times to enter Weight Upper Limit setting.
– The PCS column displays .
2. Set the Weight Upper Limit as ten ( 10 ).
3. Press key to enter Weight Lower Limit setting.
– The PCS column displays .
4. Input one (1) to set Weight Upper Limit as two (2) pounds.
5. Press to complete Weight Alarm setting.