Fairbanks 1129 SERIES Dual Platform Counting Scale - Manual (Page 12)

Section 2: Customer Service Information
08/12 12 51300 Rev. 1
  IMPORTANT INSTALLATION NOTICE  
All load cells, load cell cables and interconnecting cables used to connect all scale
components shall be located a minimum of thirty-six (36”) inches
distance away
from all single and multiple phase high energy circuits and electric
current carrying conductors.

This includes digital weight indicators, junction boxes, and power supplies.

This includes any peripheral devices, such as printers, remote displays, and
auxiliary data entry devices.

Also included is the scale components themselves, such as 120 volt AC, 240
volt AC, 480 volt AC and electric supply of higher voltage wiring runs and
stations, AC power transformers, overhead or buried cables, electric
distribution panels, electric motors, florescent and high intensity lighting
which utilize ballast assemblies, electric heating equipment, traffic light
wiring and power, and relay boxes.
All scale components, including digital weight indicators and peripheral devices are
not designed to operate on internal combustion engine driven electric generators and
other similar equipment.
NOTE: For more information, please contact a Fairbanks Service
Representative.