Fairbanks 1129 SERIES Dual Platform Counting Scale - Manual (Page 24)

Section 4: User Operations
08/12 24 51300 Rev. 1
4.4.2. Manual Tare Entry Using The Keypad
1. While in the Weigh Mode, input the Tare Weight using the numeric keys
– If the unit indicated is kg, the tare entry is in kilograms.
– If the unit indicated is lb, the tare entry is in pounds.
2. Press , and the tare weight has been stored.
– The Tare data clears in ten (10) seconds if is not pressed.
– is displayed.
EXAMPLE
1. Press to manually enter the tare weight as 0.5 lb.
2. Press the key.
is displayed.
– The weight without the container will display minus (–) 0.5 lb.
IMPORTANT NOTE: A Tare Weight cannot be manually entered that is greater
than the scale capacity.
4.5. SAMPLING OPERATION
4.5.1. Enter Piece Weight By Direct Keypad Input
1. While in the Weigh Mode, manually input the Piece Weight amount using the
keypad.
2. Press the key.
– The piece weight has been stored.
– The Piece Weight data will be cleared in ten (10) seconds if the key is
not pressed.
3. Press to clear the Piece Weight amount.