FEC AFC1200 - Manual (Page 25)

)(& ,QF
Common for all of the analog outputs. ANALOG GROUND 16
Analog Torque Output (Analog output -4.5 ~ +4.5 VDC)
A 0 ~ 2.5 VDC differential signal. Example: Zero = -2.0 VDC
Calibration (full scale) = +0.5 VDC Difference = 2.5 VDC ANALOG TORQUE
OUTPUT 15
Angle Pulse Output (Analog output 0~5 VDC)
Outputs one pulse per degree. ANGLE PULSE
OUTPUT 14
DESCRIPTION SIGNAL NAME Pin #
4.7.5 Axis Unit Bank Select Table
Output when Fastening resulted in a Final
Time Reject. FINAL TIME
OVER REJECT
BANK DATA 3
Output when Fastening resulted in a 1st
Time Reject. 1ST TIME OVER
REJECT
BANK DATA 2
Output when Fastening resulted in a 3rd
Torque Rate Low Reject. 3RD RATE LOW
REJECT
BANK DATA 1
Output when Fastening resulted in a 3rd
Torque Rate High Reject. 3RD RATE HIGH
REJECT
BANK DATA 0 ON ON 4
Output when Fastening resulted in a 2nd
Torque Rate Low Reject. 2ND RATE LOW
REJECT
BANK DATA 3
Output when Fastening resulted in a 2nd
Torque Rate High Reject. 2ND RATE HIGH
REJECT
BANK DATA 2
Output when Fastening resulted in a 1st
Torque Rate Low Reject. 1ST RATE LOW
REJECT
BANK DATA 1
Output when Fastening resulted in a 1st
Torque Rate High Reject. 1ST RATE HIGH
REJECT
BANK DATA 0 OFF ON 3
Output when Fastening resulted in an
Angle Low Reject. ANGLE LOW
REJECT
BANK DATA 3
Output when Fastening resulted in an
Angle High Reject. ANGLE HIGH
REJECT
BANK DATA 2
Output when Fastening resulted in a
Torque Low Reject. TORQUE LOW
REJECT
BANK DATA 1
Output when Fastening resulted in a
Torque High Reject. TORQUE HIGH
REJECT
BANK DATA 0 ON OFF 2
Individual spindle BYPASS output. BYPASS BANK DATA 3
Individual spindle ABNORMAL output. ABNORMAL BANK DATA 2
Individual spindle ACCEPT output. ACCEPT BANK DATA 1
Individual spindle REJECT output. REJECT BANK DATA 0 OFF OFF 1
DESCRIPTION NAME OF
SIGNAL
BANK DATA
PINS 1, 10, 9, 8
0
PIN 3
1
PIN 2
BANK
#
AXIS UNIT BANK DATA BANK
SELECT
INPUT
Chapter 4: System Setup and Wiring
Page 4-25