Plc2 bank data – FEC AFC1200 User Manual
Page 23

)(& ,QF
AXIS ENABLE4
DATA 15
AXIS ENABLE3
DATA 14
AXIS ENABLE2
DATA 13
AXIS ENABLE1
DATA 12
Binary output for enabled Axis Unit. Reads
Bank Select output. Only one (1) Axis can be
enabled to read Axis Bank 0~1 output.
AXIS ENABLE0
DATA 11
SPARE
SPARE
DATA 10
AXIS BANK 1
DATA 9
Output confirmation of Axis BANK SELECT
0~1 (Pins 2 and 3) input selections.
AXIS BANK 0
DATA 8
ON
ON
4
DATA 15
DATA 14
DATA 13
DATA12
DATA 11
DATA 10
DATA 9
SPARE
SPARE
DATA 8
OFF
ON
3
DATA 15
DATA 14
DATA 13
DATA 12
DATA 11
SPARE
SPARE
DATA 10
Reserved for future use.
CURRENT WRN
DATA 9
Reserved for future use.
FILE WARNING
DATA 8
ON
OFF
2
SEQ OUT4
DATA 15
SEQ OUT3
DATA 14
SEQ OUT2
DATA 13
These four outputs indicate that the fastening
sequence has reached a step that has an out
port [OUT] command inserted. Used to
provide sequence operation status out to the
PLC.
SEQ OUT1
DATA12
Reserved for future use.
PRN BUSY
DATA 11
Reserved for future use.
H/W WARNING
DATA 10
Reserved for future use.
PROGRAM
DATA 9
Reserved for future use.
SEQUENCE 3
DATA 8
OFF
OFF
1
DESCRIPTION
NAME OF
SIGNAL
BANK DATA
PINS 1~8
PLC2
0
PIN
21
PLC1
1
PIN 22
PLC1
BANK
#
PLC2 BANK DATA
BANK
SELECT
INPUT
Chapter 4: System Setup and Wiring
Page 4-23