Teledyne IR-7000 - Non-dispersive infrared series - Manual (Page 85)

NDIR Gas Analyzer Appendix
Teledyne Analytical Instruments., - Rev. 3 77
A-3.2 Codes for "s" Type Messages
The codes for "s" type messages are:
C ODE R ETURN M ESSAGE
1C 1
st
(ir) Cal gas value
AP Auto cal Period in hours
1R chart Range 1 value
2R chart Range 2 value
3R chart Range 3 value
4R chart Range 4 value
1H Setpoint 2 trigger level
1L Setpoint 1 trigger level
CD Cal Delay
1X 1
st
oXygen span cal setting
A-3.3 Codes for "c" Type Messages
The codes for "c" type messages are:
C ODE M ODE N AME V ALUE
PL Panel Lock 1 = lock, 0 = unlock
DB Display Brightness 0 thru 3 (3 is brightest)
RS chart Range Selected 0 = Autorange, 1 thru 4
FS Filter Selected 0 = filter 1 1 = filter 10
2 = filter 100 3 = filter 1000
CT Cal Track/hold 1 = track 0 = hold
TC Timed Cal type 0 = full 1 = Zero only
AE audible Alarm Enable 0 = disabled 1 = enabled
LM Linear Mode 0 = linear 1 = nonlinear 2 = counts
CS Cal Select 0 = Zero 1 = Span 2 = both
AK Alarm acKnowledge 1 = acknowledge alarm