Teledyne 6020 - Photometric analyzer - Manual (Page 11)

Part I: 1-3
Photometric Analyzer Part I: Control Unit
Teledyne Analytical Instruments
the Alarm menue, etc. When modifiable values are displayed on the VFD, the
UP/DOWN switch can be used to increment or decrement the values.
1.4.2 ESCAPE/ENTER Switch
The ESCAPE/ENTER switch is used to input the data, to enter a function,
or to exit a function displayed in the alphanumeric display:
• Escape Moves VFD display back to the previous screen in a
series. If none remains, returns to Analyze mode screen.
• Enter Within a menue: the funtion selected is entered moving on
to the next screen in a series.
With Value selected: Enters the value into the analyzer as
data. Advances cursor on VFD to the next operation.
In the Analyze mode: it calls the main menue. Functions
called out by the main menue:
-System This function is a menu that calls a number
of functions that regulate the analyzer
operation.
-Span This function spans the instrument.
-Zero This function zeros the instrument.
-Alarms This functions sets the alarm preferences.
-Range This function selects whether analyzer is
autoranging or locked on one range.
-Standby Places the analyzer in a sleep mode.
WARNING:
The power cable must be disconnected to fully remove power
from the instrument.