Fulton Vertical Electric (FT-N) Thermal Fluid (hot oil) Heater - Manual (Page 101)

Fulton Thermal Corp.*Electric Thermal Fluid Heaters Manual* Version 2010-0423
Page 101
650°F and shall be supplied complete with motor starter for proper motor HP, voltage and
cycles.
8. Tests
a) Shall include a hydrostatic test of the pressure vessel in the presence of an inspector
having a National Board Commission. He shall certify a Data Report which shall be
delivered with the heater as evidence of ASME Code compliance. In addition to ASME
symbol, the heater shall bear a National Board Registration Number.
b) Full electrical checks will be performed including testing of all controls and circuitry.
9. Operating Manual
a) Instructions for installation, operation, and maintenance of the heat transfer system shall
be contained in a manual provided with each unit.
b) A complete wiring diagram, corresponding to the equipment supplied, shall be part of the
manual and one shall also be affixed to the inside of the heater’s panel box.