Asus AP1720-E2 - Manual (Page 87)

3-11 ASUS AP1720-E2 barebone server
3.5 Preparing the system for rack mounting
3.5.1 Remove the footpads or roller wheels
Refer to section “2.10.7 Chassis roller wheels and footpads” for
instructions on removing the footpads or roller wheels.
3.5.2 Remove the top cover
To remove the top cover:
1. Remove the side cover. Refer to section “2.1.1 Removing the side
cover” for instructions.
2. Remove the front panel assembly. Refer to section “2.5.1 Removing
the front panel assembly” for instructions.
3. Locate the lock tab underneath the top cover and press it outward to
release the cover.
4. Slide the top cover toward the front panel, then lift it up from the
chassis.
3.5.3 Attach the rack rails
Refer to the Rackmount Rail Kit installation guide for instructions on how
to attach the rails and on the barebone server system and the
corresponding rails on the industrial rack.
Lock tab of top cover (bottom view)
The AK25 Rackmount Rail Kit is an optional item and is purchased
separately.