beautypg.com

Asus AP1720-E2 User Manual

Page 138

background image

Chapter 5: BIOS setup

5-34

KB Power On Password [Enter]

Allows you to set a password to turn the system power on. Highlight this
item then press enter to set a password.

Hot Key Power On [Ctrl-F1]

Allows you to set a hot key combination to turn the system power on.
Configuration options: [Ctrl-F1] ... [Ctrl-F12]

Resume by Alarm [Disabled]

Allows you to enable or disable RTC to generate a wake event. When this
item is enabled, you can set the date and time of alarm using the two
following items. Configuration options: [Disabled] [Enabled]

Date (of Month) Alarm [0]

To set the date of alarm, highlight this item and press to display a
pop-up menu. Key-in a value within the specified range then press
. Configuration options: [Min=0] [Max=31]

Time (hh:mm:ss) Alarm [0 : 0 : 0]

To set the time of alarm:

1. Highlight this item and press to display a pop-up menu for

the hour field.

2. Key-in a value (Min=0, Max=23), then press .
3. Press tab to move to the minutes field, then press .
4. Key-in a minute value (Min=0, Max=59), then press .
5. Press tab to move to the seconds field, then press .
6. Key-in a value (Min=0, Max=59), then press .

To configure this item, you should set the Power On Function item to
[Password].

To configure this item, you should set the Power On Function item to
[Hot Key].