Asus AP1720-E2 User Manual

Page 67

2-47

ASUS AP1720-E2 barebone server

To install a floppy disk drive:

1. Position the floppy drive vertically

with the eject button on the left
side (close to the HDDs).

2. Connect the drive signal cable

and power cable.

4. Secure the drive cage with a

screw.

3. Carefully push the drive into the

bay until the drive cage fits the
front edge of the bay.

Floppy drive
power cable

Floppy drive
signal cable

Red stripe to match
Pin 1 on the connector