Asus AP1720-E2 - Manual (Page 75)

2-55 ASUS AP1720-E2 barebone server
To remove a 600 W dual or redundant power supply:
1. Loosen four screws on the metal
brackets that secure the power
supply to the chassis.
2. Use one hand to push the power
supply module from inside the
power supply cage, then carefully
pull out the power supply module
from the chassis.
3. Set the power supply aside.
To install a 600 W dual or redundant power supply:
1. Insert the power supply cables
and plugs to the power supply
cage.
Be careful with the power supply cables when inserting the power
supply module into the cage. Due to space constraints, the cables may
get entangled with the installed components or other cables, causing
the cables to break!