Asus AP1720-E2 - Manual (Page 137)

5-33 ASUS AP1720-E2 barebone server
Video Off Method [DPMS]
This item determines the video off features. The Display Power
Management System (DPMS) feature allows the BIOS to control the video
display card if it supports the DPMS feature. [Blank Screen] only blanks
the screen. Use this for monitors without power management or “green”
features. Configuration options: [Blank Screen] [V/H SYNC+Blank] [DPMS]
Video Off In Suspend [Yes]
This item determines when to activate the video off feature for monitor
power management. Configuration options: [Yes] [No]
MODEM Use IRQ [3]
Allows you to select the IRQ assignment for the modem.
Configuration options: [NA] [3] [4] [5] [7] [9] [10] [11]
Soft-Off by PWR-BTTN [Instant-Off]
When set to [Instant-Off], the system goes to soft off when you press the
power button for less than 4 seconds. When set to [Delay 4 Sec], press
the power button for more than 4 seconds to power off the system.
Configuration options: [Instant-Off] [Delay 4 Sec.]
USB Wake-Up from S3(S4) [Disabled]
Allows you to enable or disable system wake-up from S3 or S4 state
through a USB keyboard/mouse event.
Configuration options: [Disabled] [Enabled]
Power On By PCI Devices [Enabled]
Allows you to enable or disable the PME to generate a wake-up event.
Configuration options: [Disabled] [Enabled]
Power On By External Modem [Enabled]
Allows you to enable or disable system power up when the external
modem receives a call while in soft-off mode.
Configuration options: [Disabled] [Enabled]
Power On Function [BUTTON ONLY]
Allows you to select a device to turn the system power on. Configuration
options: [Password] [Hot Key] [Mouse Left] [Mouse Right] [Any KEY]
[BUTTON ONLY] [PS/2 Mouse]