beautypg.com

Asus AP1720-E2 User Manual

Page 37

background image

2-17

ASUS AP1720-E2 barebone server

3. When released, pull up the drive bay lock bar. Underneath the lock bar

are two pegs that match the holes on the drive bay. This mechanism
secures the drive to the bay in place of screws.

4. While holding up the drive lock

bar, carefully insert a 5.25-inch
drive into the bay, until the back of
the drive aligns to the rear edge
of the drive cage.

5. Connect the IDE cable to the IDE

connector on the back of the
drive.

6. Connect a 4-pin plug from the

power supply to the power
connector on the back of the
drive.

Due to space constraints inside the chassis, do not insert the drive all
the way at this time. This will allow you enough space to easily connect
the drive cables.

IDE cable

Power plug

Drive bay holes

Lock pegs