Asus AP1720-E2 - Manual (Page 133)

5-29 ASUS AP1720-E2 barebone server
INT Pin 1~8 Assignment [Auto]
Allows you to select the appropriate interrupt to the specific devices to
avoid conflict. Configuration options: [Auto] [3] [4] [5] [7] [9] [10] [11] [12]
[14] [15]
IRQ Resources
IRQ-xx assigned to [PCI device]
The IRQ Resources sub-menu is activated when the Resources Controlled
by parameter is set to [Manual]. Select [PCI Device] to assign an IRQ
address to a Plug and Play device. Setting to [Reserved] reserves the IRQ
address. Configuration options: [PCI Device] [Reserved]
Set the item Resources Controlled By to [Manual] to enable the item
IRQ Resources and assign the interrupts depending on the type of
installed PCI devices.
IRQ-3 assigned to [PCI Device]
IRQ-4 assigned to [PCI Device]
IRQ-5 assigned to [PCI Device]
IRQ-7 assigned to [PCI Device]
IRQ-9 assigned to [PCI Device]
IRQ-10 assigned to [PCI Device]
IRQ-11 assigned to [PCI Device]
IRQ-12 assigned to [PCI Device]
IRQ-14 assigned to [PCI Device]
IRQ-15 assigned to [PCI Device]
IRQ Resources
Item Specific Help
Legacy ISA for devices
compliant with the
original PC AT bus
specification, PCI/ISA
PnP for devices
compliant with the
Plug and Play standard
whether designed for
PCI or ISa bus
architecture.
Select Menu
Reset Configuration Data [Disabled]
Resources Controlled By [Manual]
IRQ Resources
PCI/VGA Pallete Snoop [Disabled]
INT Pin 1 Assignment [Auto]
INT Pin 2 Assignment [Auto]
INT Pin 3 Assignment [Auto]
INT Pin 4 Assignment [Auto]
PCIPnP
Item Specific Help
When resources are
controlled manually,
assign each system
interrupt a type
depending on the type
of device using the
interrupt.
Select Menu