Perma Pure RATAMATION V2.0 - Manual (Page 55)

RATAmation v2.0 User Manual Perma Pure LLC
Phone (732) 244-0010
www.permapure.com
Sept. 2012 53
e. Connect an Ethernet cable directly between the FCD and the computer. Power must be on
for the FCD.
f. Go to Start, select AutomationDirect Tools, select NetEdit 3.
g. Click on the Scan Network button at the top. A line of data will fill the top line
indicating connection to the FCD.
h. Right click on the top line. A menu will open. Select General. Make sure that Obtain IP
address automatically is selected. Click OK.
i. Turn off power to the FCD. Turn on power to the FCD and restart the computer.
j. Skip to step 3