Perma Pure RATAMATION V2.0 - Manual (Page 15)

RATAmation v2.0 User Manual Perma Pure LLC
Phone (732) 244-0010
www.permapure.com
Sept. 2012 13
Stop – Available after ‘Suspend Test’ selected. Program will close test and return to an idle state
(Idle is when no test is loaded and running)
Suspend Test – Available while test loaded/running. Pauses test sequence.
Continue Test – Available while test is paused. Returns test to normal run state.
Switch to Automatic (Manual) - Available while test is paused. Will switch test from
Automatic to Manual operation or Manual to Automatic operation. The menu
item label changes depending on the current mode.
Automatic Test – Available when no test is loaded. When checked the program will run the next
test loaded in Automatic mode. The choices ‘Automatic Test’ or ‘Manual Test’
are frozen while test is running. To change operation to Automatic mode after a
test is loaded the ‘Suspend Test’ must be selected to pause the test. Then ‘Switch
to Automatic’ must be selected and finally ‘Continue Test’ is selected to restart
test in Automatic mode.
Manual Test - Available when no test is loaded. When checked the program will run the next
test loaded in Manual mode. The choices ‘Automatic Test’ or ‘Manual Test’ are
frozen while test is running. To change operation to Manual mode after a test is
loaded the ‘Suspend Test’ must be selected to pause the test. Then ‘Switch to
Manual’ must be selected and finally ‘Continue Test’ is selected to restart test in
Manual mode.
Select Specific Test - Available when a test is loaded and running in Manual mode. Opens a
submenu to that allows operator to select the item calibration or run to perform.
Figure 11