Nova-Tech PGW Series - Manual (Page 9)

Page 9 of 44
Before you start weighing, you have to wait for the balance to achieve a
stable internal temperature. Typical initial warm-up time suggested for a
balance already at room temperature is about 1 hour.
A stable sign ~ is shown when the balance is in
stable condition. It will turn off if the balance is
not stable.
Exact zero is shown when the “ О0Н “ symbol is
on to the left of the display area.
6.0 DISPLAY
This display includes areas for the weight value (up to 7
digits), symbols for common weighing units, tare, stability, zero
and low battery, arrows used for check weighing, a 0-100%
bar graph and a text area for menu.
The LCD has 7 x 7-segment digits for the weight and 10 x 14-
segment digits for messages, symbols for weighing units and
common use such as stability etc.
The 14 segment digits allow a large amount of flexibility for
any unusual weighing unit, and messages concerning
operation or errors.
The Percentage indicator known as capacity tracker has 10
large segments for showing the percentage of the total range
used. This is also used during check-weighing.
The 10 digit text area is used to display the current weighing
mode or to guide the user through processes such as density
determination.
© Adam Equipment Company 2007